CNC wire bending machine needs to pay attention to these matters in the process of using
1. If the wire rotates in the opposite direction, change the direction of rotation by operating the wire stand rotation direction switch, and move the position of the wire stand to match the direction of wire rotation.2. After the product debugging is completed, it is necessary to check and confirm whether the machine is correct. After confirming that it is correct, the sample is produced through the automatic operation of the CNC wire bending machine, and then check whether the sample meets the production requirements. If there is an error, it can be modified and debugged again.3. Do not exceed the load of the machine for production, and the wire loaded on the wire rack should not exceed the load of the wire rack.4. When using the machine, it must be operated by professional technicians, and untrained personnel are not allowed to operate the machine.5. During the operation of the machine, once an abnormality is found, it will be shut down immediately, and the operation can only be started after the problem is solved.
Market demand continues to rise, and 3D wire bending machines have become a must-have equipment for multiple industries
The rise of domestic 3D wire bending machines breaks the international technological monopoly and continues to increase market share
The Working Principle of the Wire Bending Machine
Introduction to Wire Forming Machine
