Wire bending machine is a commonly used automation equipment in the wire processing industry, and the wire feeding frame is an important component of the wire bending machine, which is related to the automatic transmission and processing of wire. How to solve the problem of wire feeding frame failure in the wire bending machine?

If the wire feeding frame of the wire bending machine malfunctions, it will affect the quality, effectiveness, and efficiency of wire processing, and corresponding solutions need to be taken in a timely manner:

1. When the wire bending machine is started and the wire feeding frame work light does not display any information or alarm, it is necessary to check whether the power switch of the wire feeding frame is in a closed state, whether the power supply of the incoming switch is powered, whether the working voltage is at the required working voltage value, and whether the fuse tube is damaged;

2. When confirming that the wire feeder of the wire bending machine is powered on, but the wire feeder does not rotate, the motor of the wire feeder should be checked to see if it can run. Remove the transmission belt to test the motor and check if the soft starter has an alarm. If there is no alarm, the soft starter should be immediately replaced;

3. When the wire feeding frame of the wire bending machine does not have the function of synchronous wire feeding, it is necessary to check whether the relay in the circuit board of the wire frame is burnt out. If the working light of the relay remains on, there is a malfunction that needs to be replaced;

4. When turning the switch of the wire bending machine, it is necessary to check that there are no words such as "common faults of the wire frame" on the information frequency. If there are any, it is necessary to check whether the support rod in the switch box contacts the induction switches on both sides. If there are no, it is also necessary to adjust it to touch or replace the induction switch.

The above are common faults in the wire feeding frame of wire bending machines. If the wire feeding frame malfunctions, corresponding solutions must be taken in a timely manner, otherwise it will affect the normal processing and production of the enterprise. If it is difficult to handle and cannot be resolved, the manufacturer should be contacted for assistance. As a professional wire forming equipment manufacturer in China, Xingtai Zhongde Machinery not only provides customers with multiple high-quality wire bending machines, but also provides customers with comprehensive after-sales service!