How to repair the failure of wire feeder of wire bending machine?

Wire bending machine is an automation equipment often used in the processing industry. The wire feed frame is the core working part of the wire bending machine, which plays the role of automatic wire feed. If the wire feeder of the wire bending machine fails, how should we solve it?

1. When the wire bending machine is started, if the work light of the wire feeder does not display information or give an alarm, it is necessary to check whether the power switch of the wire feeder is closed, whether the incoming power supply is powered, whether the working voltage is at the required working voltage, and whether the fuse tube is damaged;

2. When confirming that the wire feeder of the wire bending machine is powered on, but the wire feeder does not rotate, check whether the wire feeder motor can run, remove the drive belt to test the motor, and check whether the soft starter has an alarm. If there is no alarm, immediately remove and replace the soft starter;

3. When the wire feeding rack of the wire bending machine does not play the role of synchronous wire feeding, it is necessary to check whether the relay in the circuit board of the wire rack is burned. If the working light of the relay is always on, it is necessary to replace it in case of failure;

4. When toggling the switch of the wire bending machine, it is necessary to check that there is no such word as "common fault of wire rack" on the information frequency. If there is any, check whether the support rod in the toggling switch box touches the inductive switches on both sides. If not, adjust it to touch or remove the inductive switch.

The above is a common fault condition of wire bending machine wire feeder. If the wire feeder fails, it must be solved in time, or it will affect the normal processing and production of the enterprise. If it is difficult to handle and cannot be resolved, the manufacturer should be contacted for assistance.